Mechanical class III with plate construction

Doors of mechanical class III with panel construction

LEAF CONSTRUCTION

The leaf is constructed of a wooden frame reinforced with two vertical slats joined with plywood and an enlarged lower frame; the filling is made of perforated particleboard.

STANDARD EQUIPMENT

Door with wooden frame

• 3 pintle hinges type C adjustable in three planes
• Locking latch with a patent insert or a key

Doors with DIN system frame III mechanical class

• 3 adjustable tenon hinges type K or optionally 3 three-plane hinges type T
• Locking latch with a patent insert or a key

Doors with metal door frame

• 3 three-part hinges type T
• Locking latch and locking cylinder or key

FRAMES  

The door frame is painted, veneered, covered with CPL 0,15 mm laminate or wood-like foil matching the color of the leaf.

Wooden fixed pine optional with masking strips, quarter round. Wooden adjustable with widening panels and angle bands.
Adjustable DIN III mechanical class made of 22 mm thick MDF panels with special reinforcement under the striker plate in the form of a pine strip, angle striker plate.
Metal fixed FD12 made of 1.5 mm thick steel sheet,

FD14 fixed metal made of 1.2 mm thick sheet steel; standard powder-coated in white (RAL 9016, 9003), grey (RAL 7047), brown (RAL 8014), beige (RAL 1001), graphite (RAL 7024), black (RAL 9005).
Adjustable metal frame made of 1,5 mm thick sheet steel; powder-coated as standard in white (RAL 9016, 9003), grey (RAL 7047), brown (RAL 8014), beige (RAL 1001), graphite (RAL 7024), black (RAL 9005);
Consists of a base section and an angle bracket that slides into the base section.

OPTIONAL ACCESSORIES

• overhead door closer
• additional mortise or surface lock
• Electromagnetic door opener aversion or reversing door opener
• electromagnetic jumper
• hinge TYPE T ( 1 pc )
• DIN frame III mechanical class - surcharge of 10% to the price of the DIN adjustable frame
• width ‘100’ +10%
• drop gasket

TECHNICAL PARAMETERS

• mechanical resistance class 3, i.e. heavy duty as per PN-EN 1192:2001

ADDITIONAL INFORMATION

• Technical approval AT-15-6411/2016