DECO HPL

• solid construction - wooden frame
• surface covered with EGGER HPL laminate with a thickness of
  HPL EGGER laminate with a thickness of 0.8 mm with high resistance to mechanical damage and scratches.
  and scratches; characterized by resistance to moisture,
  temperature changes and easy to keep clean
• door frame covered with CPL laminate 0,15 mm thick
• doors also available in mechanical class III (page 168)
• adjustable hinge type C, K, T or adjustable DUO

STANDARD EQUIPMENT

• white mat or clear glass with a thickness of 4 mm
  Tempered glass white mat (version 03SD)
• single-point lock, 72 mm spacing (rebate system)
  or magnetic (rebateless system) mortise, keyed
  (spacing 90 mm), for an insert (spacing 85 mm) or for a bathroom lock
  bathroom lock (spacing of 90 mm)
• hinges: type T or type K silver - for DIN system frame,
  type C silver - for wooden doorframe, type M - for metal doorframe
  metal or covered DUO satin nickel (“60”-“80” - 2 pcs, “90” - 3 pcs).
• in the case of the leaf with a door closer and DIN or metal frame
  metal it is necessary to use hinges type T in the amount of “60”-“80” - 3 pcs;
  “90“-”110” - 4 pcs.

ADDITIONAL EQUIPMENT

• REVES (reverse rebate) system (version 00)
• third hinge in the sash or adjustable pivot hinge:
  type C for width “60”-"80”
  Type M for width “60”-"80”
  T type for width “60”-"80”
  covered DUO for width “60”-"80”
  covered TE for width “60”-"80”
• door closers, electric door openers, recuperation, drop seal
• Frame (allowing self-shortening up to 50 mm)
• frame (allowing self-shortening up to 90 mm)
• Reinforcement for door closer
• door lower by 50 mm or 100 mm
• non-standard height
• doors higher by 50 mm or 100 mm (third hinge required at extra charge)
• ventilation cut-out
• Tempered glass: version 02, 04, 05
• toughened transparent glass with a thickness of 4 mm
• possibility to make edging in other color - black, gray, graphite
• ABS edging in black, white, titano, Polish oak or anthracite (does not apply to REVES system)